PISTON AND LINER SETS Borgo Piston and Liner Sets are exactly as supplied to Alfa Romeo. Each set includes four or six pistons, liners, and wrist-pins. All pistons are pre-fitted, and cylinders are honed and ready for installation. Sets also include piston rings, but for better oil control and longer ring life, we recommend Hastings Piston Rings. Our 10% discount applies to piston and liner sets only with the purchase of a complete engine overhaul. PL210 gives better power than PL200 or PL214 without the detonation potential of PL214. PERFORMANCE PISTONS FOR 1300cc ENGINE • 1400cc KIT FOR 1300 ENGINES • MUCH IMPROVED MID-RANGE TORQUE • BORE INCREASED FROM 74mm TO 77mm • DISPLACEMENT INCREASED FROM 1290cc TO 1397cc. Our forged aluminum-alloy pistons are an update of the highly acclaimed “1400 Kit” which was popular when Giuliettas were new. The 8.3% increase in displacement greatly improves midrange torque. This will give your engine a flatter, broader torque curve with much greater flexibility. Compression ratio on a Normale is 9.5:1, and on a Veloce it is 10.0:1. No machining of the block is required. Pistons, piston pins and clips, and Hastings Piston Rings are included. The 1400 pistons will fit either 750, 101, or 105 1300 engines. Have your old liners bored, or install a set of our prebored liners on an exchange basis. No discounts apply to pistons and liners. Our 1400 Kit generates more positive feedback than any other part we sell! A 1600 head gasket is recommended.