Download directly for more content description... IMB-Q354 uATX Motherboard. Page iii. Manual Conventions. WARNING! Warnings appear where . As of the date of writing this manual (December, 2007), Intel® has not . If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IMB-Q354 from or contact an IEI sales representative directly. The items listed below should all be included in the IMB-Q354 package. 1 x IMB-Q354 single board computer 3 x SATA power cables 6 x SATA cables 1 x Dual RS-232 cable 1 x USB cable 1 x Mini jumper pack 1 x Utility CD 1 x IO shielding 1 x QIG (quick installation guide) Images of the above items are shown in Chapter 3. The IMB-Q354 uATX form factor motherboard (Figure 1-1) is an LGA775 Intel® Core™2 Quad, Intel® Core™2 Duo or Intel® Celeron® CPU processor platform. Both 45nm core (Wolfdale, Yorkfield) and 65nm core (Conroe) processors are supported. (For a full list of supported processors please refer to Section 2.3) Up to four 2.0 GB 667 MHz or 800 MHz un-buffered DDR2 SDRAM DIMM are supported by the Intel® Q35 graphics memory controller hub (GMCH). The Intel® Q35 GMCH also has a single PCI Express x16 (PCIe x16) expansion lane for a PCIe x16 graphics card. The integrated Intel® ICH9DO I/O controller hub (ICH) supports six SATA II drives with data transfer speeds of 3.0 Gbps with SATA RAID configuration support. Twelve USB 2.0 channels, one expansion PCIe x4 channel and two expansion PCI channels provide flexible expansion options. Support for a (optional) trusted platform module (TPM) provides additional system security during system boot-up.