Download directly for more content description... 2 Duo processor with the Mobile Intel. 945GME Express Chipset. Manual. May 2007 . as the motherboard. Signal quality and timings. may be measured at the pin. Intel. Core. TM . This user’s manual describes the use of the Intel Core 2 Duo processor with the Mobile Intel 945GME Express Chipset. This manual has been written for OEMs, system evaluators, and embedded system developers. This document defines all jumpers, headers, LED functions, and their locations on the board, along with subsystem features and POST codes. This manual assumes basic familiarity in the fundamental concepts involved with installing and configuring hardware for a personal computer system. This chapter identifies the evaluation kit’s key components, features and specifications. It also details basic board setup and operation. The evaluation board consists of a baseboard populated with the Intel Core TM 2 Duo processor and the Intel 945GME Express Chipset, other system board components, and peripheral connectors. Note: The evaluation board is shipped as an open system allowing for maximum flexibility in changing hardware configuration and peripherals. Since the board is not in a protective chassis, take extra precaution when handling and operating the system. Features of the development kit board are summarized below: Processor • Intel Core TM 2 Duo processor with 4 MByte L2 Cache on 65nm process in the 478 pin Flip Chip Pin Grid Array (Micro-FCPGA) package Mobile Intel 945GME Express Graphics Memory Controller Hub (945GME Express GMCH) • 1466 pin Micro-FCBGA Package• Supports a 533/667 MHz front side bus• Supports dual-Channel DDR2 at 400/533/667 MHz• Two SODIMM slots (one per channel) support DDR2 SODIMMS (unbuffered, non- ECC) modules • Supports 128 MBytes to 4 GBytes using 256 Mbit, 512 Mbit, or 1 Gbit technology• x16 PCI Express* Graphics or Serial Digital Video Out (SDVO) port• 18 bpp LVDS, VGA & TV-D connector support