BMW E34 TOURING REPAIR LAYOUT REAR WIRE HARNESS

ID# : 2334
Under Category : Automotive Guide BMW
Source: www.bmwe34.net

Cached Content

BMW E34 Touring Rear Wire Harness Repair Layout. The repair wiring harnesses for E34 touring models are universal for ALL applications (Europe, ...

File Summary

The high mount stop light wires (two wires in one sheath), and window defroster wires (two wires in one sheath), connect directly to plug ends behind the grommets where the harnesses enter the D pillar. If you observe how things are assembled as you are taking the old wiring out, you will see how they should go back together. At the other end of the respective wiring, the high mount stop light has two spade ends that connect to the back of the stop light, while the defroster wiring needs to be spliced in to the leads coming off the grid on the rear window. Cut the existing ones 4 or 5 inches from where they are attached to the window and solder and shrink wrap the new ends to them

             Help others by telling us that this link is not pdf file.